|

There is a
growing desire from private house owners to have a decorative water
garden, a longing which however is accompanied by the demand that the
pond is permanently filled with clean, clear water, surrounded by
healthy water plants. Ponds, in which – if they want – they can have
fishes be swimming without problems..
The only way this can be achieved, in the most
environmentally friendly way, without tiring activities like cleaning
the pond too often and keeping it algae free without having to use
nature damaging chemicals, is an ultrasonic device, the
LG
Sonic
SSS.
This is the smallest and cheapest of the series of
four
LG
Sonic devices which exterminate
algae quickly and effective. The
LG
Sonic
SSS is designed for owners of small
hobby gardens with matching water parties,
It is of the same high quality and works in the
same technically perfect way like the three other devices but on an
other for private use more suitable scale, economically priced with a
very low electricity consumption.
The method of algae killing is like the other
devices by ultrasonic for humans and animals inaudible underwater
sound waves, which cause vibrations ripping the algae vacuoles, micro
cells in which the life functions are housed, thus killing the algae.
Most kinds of dead algae sink to the bottom, the
ones which come to float to the surface have
to be scooped up from the water. Afterwards the development of the
algae spores which drift into the water by the wind will be stopped
from growing as long as the
LG
Sonic
SSS
will be operating in
the water.
Also this device has the extra advantage that – if
the pond is made of foil or polyester -
The green slimy layer which after some time appears
on the wall, will loosen itself, comes of or anyway will be a lot
easier to remove.
If from the moment of installation an ultrasonic device is installed, the water
will remain in balance a lot better and water plants will get a normal chance
to develop.
Users of the
LG
Sonic
SSS
have to see to it that they install the device according to the
instructions. After having mounted the electronic box in a dry,
covered place, first put the transducer in the water, with the front
in such a way that the 180 degrees from the transducer beaming
ultrasonic waves cover as much of the pond as possible. After this
the plug from the power cable has to be put
in the socket of the mains and the device is in operation.
Market possibilities
Good chances for distributors are sales to shops which specialize
in pond accessories or pond builders/sellers and landscape architects
|
Technical data |
|
Range: 10 x10 metres
|
|
Consumption: 20 Watts |
|
Cable
length: 10 metres |
LG
Sonic
SSS Electronic Box
This
is the Transducer
|