There is a growing desire from private house owners to have a decorative water garden, a longing which however is accompanied by the demand that the pond is permanently filled with clean, clear water, surrounded by healthy water plants. Ponds, in which – if they want – they can have fishes  be swimming without problems..

The only way this can be achieved, in the most environmentally friendly way, without tiring activities like cleaning the pond too often and keeping it algae free without having to use nature damaging chemicals, is an ultrasonic device, the      LG Sonic SSS.

This is the smallest and cheapest of the series of four LG Sonic devices which exterminate algae quickly and effective. The LG Sonic SSS is designed for owners of small hobby gardens with matching water parties,

It is of the same high quality and works in the same technically perfect way  like the three other devices but on an other for private use more suitable scale, economically priced with a  very low electricity consumption.

The method of algae killing is like the other devices by ultrasonic for humans and animals inaudible underwater sound waves, which cause vibrations ripping the algae vacuoles,  micro cells in which the life functions are housed, thus killing the algae.

Most kinds of  dead algae sink to the bottom, the ones which come to float to the surface have to be scooped up from the water. Afterwards the development of the algae spores which drift into the water by the wind will be stopped from growing as long as the LG Sonic SSS will be  operating in the water.

Also this device has the extra advantage that – if the pond is made of foil or polyester -

The green slimy layer which after some time appears on the wall, will loosen itself, comes of or anyway will be a lot easier to remove. 

If from the moment of installation an ultrasonic device is installed, the water

will remain in balance a lot better and water plants will get a normal chance

to develop.

Users of the LG Sonic SSS have to see to it that they install the device according to the instructions. After having mounted the electronic box in a dry, covered place, first put the transducer in the water, with the front in such a way that the 180 degrees from the transducer beaming ultrasonic waves cover as much of the pond as possible.  After this the plug from the power cable has to be put in the socket of the mains and the device is in operation. 

Market possibilities

Good chances for distributors are sales are to shops which specialize in pond accessories or pond builders/sellers and landscape architects

        La boîte électronique

   Le transducteur